The ASHRAE Handbook is published in a series of four volumes, one of which is revised each year, ensuring that no volume is older than four years.
TC 6.8 is responsible for the following handbook chapters:
HVAC APPLICATIONS: Geothermal Energy
The use of geothermal resources can be subdivided into three general categories: high-temperature (>300°F [>150°C]) electric power production, intermediate- and low-temperature (<300°F [<150°C]) direct-use applications, and ground-source heat pump applications (generally<90°F [<32°C]). This chapter covers only direct use (including wells, equipment, and applications) and ground-source heat pumps. Design aspects of the building heat pump loop may be found in Chapter 9 of the ASHRAE Handbook HVAC Systems and Equipment.
The ASHRAE HVAC APPLICATIONS HANDBOOK may be purchased from the on-line bookstore by clicking on the highlighted text.
HVAC SYSTEMS AND EQUIPMENT: Applied Heat Pump and Heat Recovery Systems
A heat pump extracts heat from a source and transfers it to a sink at a higher temperature. According to this definition, all pieces of refrigeration equipment, including air conditioners and chillers with refrigeration cycles, are heat pumps. In engineering, however, the term heat pump is generally reserved for equipment that heats for beneficial purposes, rather than that which removes heat for cooling only. Dual-mode heat pumps alternately provide heating or cooling. Heat reclaim heat pumps provide heating only, or simultaneous heating and cooling. An applied heat pump requires competent field engineering for the specific application, in contrast to the use of a manufacturer-designed unitary product. Applied heat pumps include built-up heat pumps (field- or custom-assembled from components) and industrial process heat pumps. Most modern heat pumps use a vapor compression (modified Rankine) cycle or absorption cycle. Any of the other refrigeration cycles discussed in Chapter 2 of the 2009 ASHRAE Handbook—Fundamentals are also suitable. Although most heat pump compressors are powered by electric motors, limited use is also made of engine and turbine drives. Applied heat pumps are most commonly used for heating and cooling buildings, but they are gaining popularity for efficient domestic and service water heating, pool heating, and industrial process heating.
The ASHRAE HVAC SYSTEMS AND EQUIPMENT HANDBOOK may be purchased on the on-line bookstore by clicking the highlighted text.
Comment on the Handbook: ASHRAE welcomes your comments on the Handbook or a specific Handbook chapter. To submit a comment about any aspect or part of the Handbook series, you can use the Handbook Comment Form.
Review a Handbook Chapter: To provide your feedback about a specific Handbook chapter, you can answer the brief survey questions on the Handbook Chapter Review Form.
Technical committees develop and sponsor technical sessions at the winter and annual conferences. Information about their future technical program is discussed at each TC meeting and at the TC’s Program Subcommittee meeting
ASHRAE publishes papers and transactions from presentations at its conference events. In addition, ASHRAE records most of the seminar sessions from its conferences on DVD. These DVDs are ideal for use at chapter meetings, in university courses, or company lunch and learns. Products available from the most recent conference may be found here.
At the recent ASHRAE conference, TC 6.8 sponsored the following technical sessions:
Seminar 34: Field Performance Results of VRF, GSHP and GS-VRF Systems: The "Living Lab" Results Are In
Seminar 42: Ground Source Heat Pumps and Solar Together: Highest Energy Efficiencies Become Possible
Technical Committees are responsible for identifying research topics, proposing research projects, selecting bidders, and monitoring research projects funded by ASHRAE. Information about their specific research program is discussed at each TC meeting and at the TC’s Research Subcommittee meeting.
TC 6.8 is sponsoring the on-going research project:
1385-RP: DEVELOPMENT OF DESIGN TOOLS FOR SURFACE WATER HEAT PUMP SYSTEMS (SWHP)
The objective of this project is to provide improved design data and design tools for SWHP systems. The scope includes collection, interpretation, and collation of design data; experimental measurement of convection coefficients on submerged heat exchanges, and development of design tools.
ASHRAE writes standards for the purpose of establishing consensus for: 1) methods of test for use in commerce and 2) performance criteria for use as facilitators with which to guide the industry. ASHRAE publishes the following three types of voluntary consensus standards: Method of Measurement or Test (MOT), Standard Design and Standard Practice. ASHRAE does not write rating standards unless a suitable rating standard will not otherwise be available. ASHRAE is accredited by the American National Standards Institute (ANSI) and follows ANSI's requirements for due process and standards development. Standards may be purchased at the ASHRAE Bookstore.
TC6.8 is the cognizant committee for Standard 194.
Std.194: Method of Test for Direct-Expansion Ground Source Heat Pumps
TC 6.8 participates in a Multidisciplinary Task Group:
Avoided Sources of Energy Consumption Due to Waste Heat Recovery and Heat Pump Technologies
MTG.ASEC will coordinate development of credible quantification methodologies of the avoided electric power generation and/or primary energy consumptions resulting from the application of heat pump and waste energy recovery technologies.
ASHRAE Technical FAQs are provided as a service to ASHRAE members, users of ASHRAE publications, and the general public. While every effort has been made to ensure their accuracy and reliability, they are advisory and provided for informational purposes only, and in many cases represent only one person’s view. They are not intended and should not be relied on as an official statement of ASHRAE. Technical questions not addressed may be submitted to the ASHRAE Technical Services department at firstname.lastname@example.org.
TC 6.8 is cognizant for the following FAQ:
Where can I find information on geothermal energy and ground source heat pumps?